FAQ
Filter by category or search by keyword. Click a product to view its Q&A.
-
Q. How do I use this product properly?
A. Follow the product page guide and fine‑tune dosage/interval based on your tank’s condition.
-
Q. Can I combine it with other Aquario products?
A. Generally compatible. Avoid excessive overlap of similar functions.
-
Q. How should I store it?
A. Keep sealed, away from direct sunlight and heat.
-
Q. Do I need to rinse before setup?
A. No. Use as is. Pour water slowly to protect the trapped air layer and nutritional layer.
-
Q. What water‑change schedule do you recommend after first setup?
A. Day 0–20: 50% every 2 days; Day 21–30: 50% every 3 days; After Day 31: 50% once per week.
-
Q. When can I add shrimp and fish?
A. Shrimp around week 1 after stabilization; small fish after week 2, depending on species sensitivity.
-
Q. When should I start dosing fertilizers?
A. If bioload is low, start lightly from week 2 and increase gradually while observing plant response.
-
Q. How do I use this product properly?
A. Follow the product page guide and fine‑tune dosage/interval based on your tank’s condition.
-
Q. Can I combine it with other Aquario products?
A. Generally compatible. Avoid excessive overlap of similar functions.
-
Q. How should I store it?
A. Keep sealed, away from direct sunlight and heat.
-
Q. Should I rinse the soil?
A. No. Rinsing can reduce performance. Use directly and fill water gently.
-
Q. How long does it last?
A. Typically 1–2 years, depending on maintenance and bioload.
-
Q. How does it affect pH?
A. It tends to stabilize slightly acidic, favorable for most aquatic plants.
-
Q. Is it safe with shrimp?
A. Yes. Introduce sensitive species after initial stabilization.
-
Q. Should I rinse the soil?
A. No. Rinsing can reduce performance. Use directly and fill water gently.
-
Q. How long does it last?
A. Typically 1–2 years, depending on maintenance and bioload.
-
Q. How does it affect pH?
A. It tends to stabilize slightly acidic, favorable for most aquatic plants.
-
Q. Is it safe with shrimp?
A. Yes. Introduce sensitive species after initial stabilization.
-
Q. Where should I place it?
A. Inside the filter or along the flow path. Lay flat to avoid blocking flow.
-
Q. Can I regenerate or wash it?
A. Light rinsing is fine. Replace when performance drops noticeably.
-
Q. How often should I replace it?
A. Depends on water quality and bioload; typically every 1–3 months.
-
Q. Where should I place it?
A. Inside the filter or along the flow path. Lay flat to avoid blocking flow.
-
Q. Can I regenerate or wash it?
A. Light rinsing is fine. Replace when performance drops noticeably.
-
Q. How often should I replace it?
A. Depends on water quality and bioload; typically every 1–3 months.
-
Q. Where should I place it?
A. Inside the filter or along the flow path. Lay flat to avoid blocking flow.
-
Q. Can I regenerate or wash it?
A. Light rinsing is fine. Replace when performance drops noticeably.
-
Q. How often should I replace it?
A. Depends on water quality and bioload; typically every 1–3 months.
-
Q. Where should I place it?
A. Inside the filter or along the flow path. Lay flat to avoid blocking flow.
-
Q. Can I regenerate or wash it?
A. Light rinsing is fine. Replace when performance drops noticeably.
-
Q. How often should I replace it?
A. Depends on water quality and bioload; typically every 1–3 months.
-
Q. What’s the difference between SOFT / PURE / HARD?
A. SOFT buffers slightly acidic; HARD tends slightly alkaline; PURE is near‑neutral to pH.
-
Q. Rinse before first use?
A. Quickly rinse to remove dust. Over‑washing may damage micro‑pores.
-
Q. Replacement cycle?
A. Commonly 1–2 years. Partial replacement (30–50%) is more stable than full swap.
-
Q. How do I adjust the bubble rate?
A. Use the fine control valve and monitor plant health to fine‑tune injection.
-
Q. How long does one set last?
A. Duration depends on tank size and daily injection rate. Expect several weeks under typical use.
-
Q. Is it safe for fish and shrimp?
A. Yes, when used at recommended rates. Over‑injection may cause respiratory stress.
-
Q. How do I clean when bubbles get larger?
A. Soak the ceramic disk in a 1:20 bleach solution for 5–10 minutes, then neutralize and rinse thoroughly.
-
Q. What hose size is compatible?
A. Commonly 4/6 mm (inner/outer diameter).
-
Q. Where is the best installation position?
A. Place it to distribute CO₂/air evenly with the tank’s flow pattern.
-
Q. How do I clean when bubbles get larger?
A. Soak the ceramic disk in a 1:20 bleach solution for 5–10 minutes, then neutralize and rinse thoroughly.
-
Q. What hose size is compatible?
A. Commonly 4/6 mm (inner/outer diameter).
-
Q. Where is the best installation position?
A. Place it to distribute CO₂/air evenly with the tank’s flow pattern.
-
Q. How do I clean when bubbles get larger?
A. Soak the ceramic disk in a 1:20 bleach solution for 5–10 minutes, then neutralize and rinse thoroughly.
-
Q. What hose size is compatible?
A. Commonly 4/6 mm (inner/outer diameter).
-
Q. Where is the best installation position?
A. Place it to distribute CO₂/air evenly with the tank’s flow pattern.
-
Q. Which hose/pipe sizes are supported?
A. Standard sizes such as 12/16 and 16/22 mm. Check product specs for exact compatibility.
-
Q. Can I heat‑bend or cut it to fit?
A. Yes. Avoid overheating to prevent deformation or discoloration.
-
Q. How do I clean and maintain it?
A. Remove debris with lukewarm water and dry. Verify chemical safety before using cleaning agents.
-
Q. Which hose/pipe sizes are supported?
A. Standard sizes such as 12/16 and 16/22 mm. Check product specs for exact compatibility.
-
Q. Can I heat‑bend or cut it to fit?
A. Yes. Avoid overheating to prevent deformation or discoloration.
-
Q. How do I clean and maintain it?
A. Remove debris with lukewarm water and dry. Verify chemical safety before using cleaning agents.
-
Q. Which hose/pipe sizes are supported?
A. Standard sizes such as 12/16 and 16/22 mm. Check product specs for exact compatibility.
-
Q. Can I heat‑bend or cut it to fit?
A. Yes. Avoid overheating to prevent deformation or discoloration.
-
Q. How do I clean and maintain it?
A. Remove debris with lukewarm water and dry. Verify chemical safety before using cleaning agents.
-
Q. Which hose/pipe sizes are supported?
A. Standard sizes such as 12/16 and 16/22 mm. Check product specs for exact compatibility.
-
Q. Can I heat‑bend or cut it to fit?
A. Yes. Avoid overheating to prevent deformation or discoloration.
-
Q. How do I clean and maintain it?
A. Remove debris with lukewarm water and dry. Verify chemical safety before using cleaning agents.
-
Q. Which hose/pipe sizes are supported?
A. Standard sizes such as 12/16 and 16/22 mm. Check product specs for exact compatibility.
-
Q. Can I heat‑bend or cut it to fit?
A. Yes. Avoid overheating to prevent deformation or discoloration.
-
Q. How do I clean and maintain it?
A. Remove debris with lukewarm water and dry. Verify chemical safety before using cleaning agents.
-
Q. Which hose/pipe sizes are supported?
A. Standard sizes such as 12/16 and 16/22 mm. Check product specs for exact compatibility.
-
Q. Can I heat‑bend or cut it to fit?
A. Yes. Avoid overheating to prevent deformation or discoloration.
-
Q. How do I clean and maintain it?
A. Remove debris with lukewarm water and dry. Verify chemical safety before using cleaning agents.
-
Q. Which hose/pipe sizes are supported?
A. Standard sizes such as 12/16 and 16/22 mm. Check product specs for exact compatibility.
-
Q. Can I heat‑bend or cut it to fit?
A. Yes. Avoid overheating to prevent deformation or discoloration.
-
Q. How do I clean and maintain it?
A. Remove debris with lukewarm water and dry. Verify chemical safety before using cleaning agents.
-
Q. Which hose/pipe sizes are supported?
A. Standard sizes such as 12/16 and 16/22 mm. Check product specs for exact compatibility.
-
Q. Can I heat‑bend or cut it to fit?
A. Yes. Avoid overheating to prevent deformation or discoloration.
-
Q. How do I clean and maintain it?
A. Remove debris with lukewarm water and dry. Verify chemical safety before using cleaning agents.
-
Q. Which hose/pipe sizes are supported?
A. Standard sizes such as 12/16 and 16/22 mm. Check product specs for exact compatibility.
-
Q. Can I heat‑bend or cut it to fit?
A. Yes. Avoid overheating to prevent deformation or discoloration.
-
Q. How do I clean and maintain it?
A. Remove debris with lukewarm water and dry. Verify chemical safety before using cleaning agents.
-
Q. Which hose/pipe sizes are supported?
A. Standard sizes such as 12/16 and 16/22 mm. Check product specs for exact compatibility.
-
Q. Can I heat‑bend or cut it to fit?
A. Yes. Avoid overheating to prevent deformation or discoloration.
-
Q. How do I clean and maintain it?
A. Remove debris with lukewarm water and dry. Verify chemical safety before using cleaning agents.
-
Q. What’s the dosing guideline and interval?
A. Start with the recommended dose based on tank size and planting density, then adjust by observing algae and growth.
-
Q. How can I spot nutrient deficiencies?
A. Yellowing, holes, or transparency can indicate N/K/micronutrient deficiencies.
-
Q. Can I use it together with substrate fertilizers?
A. Yes. Avoid over‑dosing; increase gradually and monitor.
-
Q. What’s the dosing guideline and interval?
A. Start with the recommended dose based on tank size and planting density, then adjust by observing algae and growth.
-
Q. How can I spot nutrient deficiencies?
A. Yellowing, holes, or transparency can indicate N/K/micronutrient deficiencies.
-
Q. Can I use it together with substrate fertilizers?
A. Yes. Avoid over‑dosing; increase gradually and monitor.
-
Q. What’s the dosing guideline and interval?
A. Start with the recommended dose based on tank size and planting density, then adjust by observing algae and growth.
-
Q. How can I spot nutrient deficiencies?
A. Yellowing, holes, or transparency can indicate N/K/micronutrient deficiencies.
-
Q. Can I use it together with substrate fertilizers?
A. Yes. Avoid over‑dosing; increase gradually and monitor.
-
Q. When and how often should I dose?
A. Dose after water changes or when water conditioning is needed, following the label instruction.
-
Q. Is it safe for shrimp/fry?
A. Safe at recommended dosage. For sensitive species, start with half dose and observe.
-
Q. Can I combine with other products?
A. Generally yes, but avoid overlapping products with the same function.
-
Q. Is it safe for shrimp/fry?
A. Safe at recommended dosage. For sensitive species, start with half dose and observe.
-
Q. When and how often should I dose?
A. Dose after water changes or when water conditioning is needed, following the label instruction.
-
Q. Can I combine with other products?
A. Generally yes, but avoid overlapping products with the same function.
-
Q. Is it safe for shrimp/fry?
A. Safe at recommended dosage. For sensitive species, start with half dose and observe.
-
Q. When and how often should I dose?
A. Dose after water changes or when water conditioning is needed, following the label instruction.
-
Q. Can I combine with other products?
A. Generally yes, but avoid overlapping products with the same function.
-
Q. Is it safe for shrimp/fry?
A. Safe at recommended dosage. For sensitive species, start with half dose and observe.
-
Q. When and how often should I dose?
A. Dose after water changes or when water conditioning is needed, following the label instruction.
-
Q. Can I combine with other products?
A. Generally yes, but avoid overlapping products with the same function.
-
Q. Is it safe for shrimp/fry?
A. Safe at recommended dosage. For sensitive species, start with half dose and observe.
-
Q. When and how often should I dose?
A. Dose after water changes or when water conditioning is needed, following the label instruction.
-
Q. Can I combine with other products?
A. Generally yes, but avoid overlapping products with the same function.
-
Q. Is it safe for shrimp/fry?
A. Safe at recommended dosage. For sensitive species, start with half dose and observe.
-
Q. When and how often should I dose?
A. Dose after water changes or when water conditioning is needed, following the label instruction.
-
Q. Can I combine with other products?
A. Generally yes, but avoid overlapping products with the same function.
-
Q. Is it safe for shrimp/fry?
A. Safe at recommended dosage. For sensitive species, start with half dose and observe.
-
Q. When and how often should I dose?
A. Dose after water changes or when water conditioning is needed, following the label instruction.
-
Q. Can I combine with other products?
A. Generally yes, but avoid overlapping products with the same function.
-
Q. Is it safe for shrimp/fry?
A. Safe at recommended dosage. For sensitive species, start with half dose and observe.
-
Q. When and how often should I dose?
A. Dose after water changes or when water conditioning is needed, following the label instruction.
-
Q. Can I combine with other products?
A. Generally yes, but avoid overlapping products with the same function.
-
Q. Is it safe for shrimp/fry?
A. Safe at recommended dosage. For sensitive species, start with half dose and observe.
-
Q. When and how often should I dose?
A. Dose after water changes or when water conditioning is needed, following the label instruction.
-
Q. Can I combine with other products?
A. Generally yes, but avoid overlapping products with the same function.
-
Q. What dosing frequency do you recommend?
A. Typically once per week. During initial setup or reset, temporary higher frequency can help stabilization.
-
Q. Is it safe for shrimp and fry?
A. Yes at recommended amounts. If any stress is observed, perform a water change and halve the dose.
-
Q. Can I use it with other capsules/liquids?
A. Yes, but avoid over‑dosing. Staggering the timing is safer.
-
Q. What dosing frequency do you recommend?
A. Typically once per week. During initial setup or reset, temporary higher frequency can help stabilization.
-
Q. Is it safe for shrimp and fry?
A. Yes at recommended amounts. If any stress is observed, perform a water change and halve the dose.
-
Q. Can I use it with other capsules/liquids?
A. Yes, but avoid over‑dosing. Staggering the timing is safer.
-
Q. Is it safe for shrimp/fry?
A. Safe at recommended dosage. For sensitive species, start with half dose and observe.
-
Q. When and how often should I dose?
A. Dose after water changes or when water conditioning is needed, following the label instruction.
-
Q. Can I combine with other products?
A. Generally yes, but avoid overlapping products with the same function.
-
Q. What dosing frequency do you recommend?
A. Typically once per week. During initial setup or reset, temporary higher frequency can help stabilization.
-
Q. Is it safe for shrimp and fry?
A. Yes at recommended amounts. If any stress is observed, perform a water change and halve the dose.
-
Q. Can I use it with other capsules/liquids?
A. Yes, but avoid over‑dosing. Staggering the timing is safer.
-
Q. What dosing frequency do you recommend?
A. Typically once per week. During initial setup or reset, temporary higher frequency can help stabilization.
-
Q. Is it safe for shrimp and fry?
A. Yes at recommended amounts. If any stress is observed, perform a water change and halve the dose.
-
Q. Can I use it with other capsules/liquids?
A. Yes, but avoid over‑dosing. Staggering the timing is safer.
-
Q. What dosing frequency do you recommend?
A. Typically once per week. During initial setup or reset, temporary higher frequency can help stabilization.
-
Q. Is it safe for shrimp and fry?
A. Yes at recommended amounts. If any stress is observed, perform a water change and halve the dose.
-
Q. Can I use it with other capsules/liquids?
A. Yes, but avoid over‑dosing. Staggering the timing is safer.